RODENBERG amplification
Home > Products > COMMANDER für for guitar and bass
Distortion Pedal • Drive, Tone and Level controls • ON foot switch: Pedal ON/OFF • HOT switch: High gain mode • FAT boost switch: Lower frequencies boost • Input voltage 9V DC - 18V DC • Target LED blue, turns red in HOT mode • Unique stainless steel carbon design • True bypass • Selected components • Top panel made of stainless steel • 3D effect • Powered by an external standard 9V -18V DC power adapter (Power adapter is not included, please order separately) or 9V battery • Current draw: 20mA • Dimensions (L/D/H (inch)): 2.4 x 4.6 x 1.2  / Weight: 0.7 lbs • 100% handmade in Germany • 3 years warranty
 COMMANDER Distortion for guitar and bass
Power supply All single (not the XS series) pedals can be powered with both, battery (9V block) and external power supply. On the rear is the socket for connecting an external power supply. It is a standard 2.1mm socket as used by (almost) all manufacturers of effects devices. All commercially available power supplies for effect devices (9V -18V DC, + = outer ring, ground = pin) can be used. If a power supply is connected, the internal battery will automatically switch off. To replace the battery, unscrew the 4 screws of the floor plate, remove the floor plate and change the battery.
True bypass When the pedal s turned off, the guitar signal gets passed through to reach the amp without any loss of signal. The pedal is totally switched out of the signal path.
FAT boost Toggle switch right side ON: The FAT boost lifts the lower and mid frequencies, the overall sound stays defined without getting muddy.
HOT mode Toggle switch left side ON (Target LED red): Gain boost, 3x more gain and more mids than in standard mode Toggle switch left side OFF (Target LED blue): Standard COMMANDER overdrive sound.